Down to the wire Jungle January

I come from a long line of chronically late procrastinators. I learned from the world’s best how to stall, delay, and be more-than-fashionably late. Which is why, on the absolute last day of January 2016 I’m here to share my Jungle January projects with you. 😉

First up is a second Lekala 4042 in *sigh* rayon jersey (I’m so predictable). This shirt has been a long time coming. I think I bought the fabric for it last August, cut out all but the back, ran out of fabric, couldn’t find more, and then finally did, but didn’t have time to cut it out for a while…I’m sure you’ve been there before. It basically went together like the first one, but I got a bit cocky with the neckline since I’d done it before, and that was a big no-no. I fiddled and fussed with it for at least twice as long as the first time, but I finally wrestled it into submission. And I made sure to stabilize both the shoulder seams and the upper chest seams. I highly recommend you do the same, because it made a world of difference in the end. Trust me.

No modeled pics, but you can see how the pattern looks on a body in the previous post. 🙂

Thought you might like to see the twist up close. 🙂

Yes, this does mean that I now have two royal blue versions of this shirt…oh well. 😉

Lekala 4420 in rayon challis (seriously, you knew that was coming, right?) was another one that didn’t seem to want to come together. Somehow it ended up being 4″ too big all the way around, even though I put in the same measurements I’ve used before. I also added 3″ of length that the front needed, but the back did not. If I were ever to wear leggings as pants, this would definitely cover my butt, but I’m not a leggings as pants type of gal. Sorry. I left the length alone though…for now. Some other changes:

• Raised the front neckline–it showed my bra, and while it still does in certain positions, at least it’s not just a given that my bra will show like it was before. If I’d have known, I would have shortened it above the bust before cutting out the fabric, but I didn’t.
• French seams. No idea why, and sadly I didn’t get a picture of it. But, you’ve all seen them before, so it’s not exactly earthshattering.
• Lengthened the sleeves 2″. This was just about perfect, though I almost wish I’d have added another 1″. Bracelet length isn’t one I’m used to, so it feels awkward.
• Pearl snaps, baby. Oh yes, I went there. 😉
• Instead of bias binding for the neckline, I used a crossgrain strip from my meager scraps that I had left after cutting this out. It has a little bit of give, but my tiny head didn’t need it anyway.
• This was my first time using a placket like this, so I used Sewaholic’s tutorial. It worked OK, but I couldn’t avoid the puckers completely, so mine are puckery. The busy print covers it though, so I think it’ll be OK.

Overall though, the pattern itself went together flawlessly, notches matched perfectly, etc., etc. And while I seem to have to add length to everything, that’s such an easy fix when you compare it to FBAs and such. And it’s also something that’s easy to spot before you start cutting out fabric.

This slideshow requires JavaScript.