I’ve been seriously in love with the cool, rainy week we’ve had. Maybe it’s in my genes, but I’m happiest when the sun is more of a special surprise and it’s not our typical Kansas summer blowtorch. So you could say that I’ve spent the last week glorying in overcast days. And even though the sun is shining today, it’s still nice and cool with a lovely breeze.
Enough about the weather, but it’s what inspired me to head back to the sewing room to whip up a four-peat. And as an extra bonus, I found a good occasion to break out an ITY and some slinky that’s been in my stash for….forever. As it turns out, those two fabrics work well for sleeping. Who knew?!
To make them, I used a OOP Kwik Sew pattern that I made a lot of changes to.
- The first thing I did after tracing off my sizes, was rotate the dart that creates the pleats/gathers into a bust dart. I know that bust darts on knits are kind of controversial, but I don’t mind them.
- Then I trued up the front edge, eliminating the excess that would have been gathered/pleated.
- Narrowed up the shoulders–even though I cut them at a size S, they were still too wide for a tank/dress to my eye. I shaved off about 5/8″, tapering to nothing at the underarm seam.
- And then I discovered after cutting out the first one that it was indecently low–even Burda would blush! So I hacked off 1.5″ at the top of the front shoulders, and then re-narrowed them so that they matched the back and transferred this to my paper pattern.
Because this was a test, I wasn’t too worried about how it would look, but since everything fit the way I wanted it to, I went ahead and used a 12″ wide strip that I doubled over and sewed it to the bottom. It didn’t gather as much as I’d have hoped, but it has a little bit of swing to it that I liked. I was worried that I wasn’t going to like the ITY for sleeping (because I decided it would be a nightgown when I added the “skirt”), but it’s actually much nicer than I thought it would be.
Excited by this knowledge, I quickly grabbed a piece of slinky from my stash and sewed it up exactly the same way–“skirt” and all. I’ll admit that I am not loving this one as much, but it’s actually not bad to wear for sleeping, and no one outside of the house will see it’s flaws…well, except you, but I trust you can keep a secret!
Pride goeth before a fall though, and I stumbled pretty hard on number three. You see, the other two were practice runs to even see if this pattern would look like what I wanted it to before I cut into some super pretty lace to make into something that might actually see the light of day. I liked the way the neckline and shoulders turned out, and the length was pretty close, except I wanted a “mullet” hem and a neckline pleat in the back. So I merrily added an additional inch of width to the back and the mullet part went in great too, until I discovered that this particular fabric stretches the wrong way. Instead of stretching from selvege to selvege, it stretched from cut end to cut end. And I had NEVER EVEN THOUGHT TO CHECK. 🤦♀️ I realized it before I cut the front, so I cut the front on the correct stretch line and stitched it together as planned and hoped for the best. Print-wise, it made no difference, and if you look closely you can tell the weave is slightly different, but mostly you can feel it in the fit. I barely got it over my head with the pleats sewn in.
After scratching my head for a minute, I let out the pleat and tried it on again. Much better! I modeled it for the hubby to see if there was a giant wad of fabric at the back neckline, and he said no. So I went ahead and finished it, because I didn’t have it in me to throw it away. It actually turned out pretty good, but the fabric is quite scratchy where my arms rub against my side. I’m hoping this gets better with washing, but it’s not going to be an “every day” shirt anyway, so even if it doesn’t I can probably tolerate it long enough to wear it to church or something.
Then I spied some more ITY in my stash that had been hacked on as a test for something else, but I had enough left to make another nightgown. I got it all cut out and sewn together, exactly as the others, except the neckband just would. not. go. in! I think I ripped that neckband out 4 or 5 times before the seam allowances on the bodice gave out and got holes in them. I decided it wasn’t worth the battle and tossed it in the trash. Sometimes you just gotta pick your battles, you know? At least I got to try out a new toy, right?
So that’s what I’ve been up to. Well, that and building stuff in the garage. I built a little roll around cart for the jointer/planer and my husband and I are currently working on a platform bed for Scotch. Hopefully, he’s mature enough to handle a “top bunk” at the ripe old age of 4 and a half. 🤞 We painted it last night, and hopefully soon we’ll get the rails done and painted so we can mount it on the wall. Because I’m ready to make a corner hutch for my dining room…#toomanyprojectstoolittletime 😆
And I don’t promise that there won’t be another one (or two!) of these coming up soon to wear for every day.
I need to get a third hand too!
Yes! Do it! I didn’t use mine for several months because I kept forgetting it was there, but I don’t think I’m gonna forget again!